Use current location
These services are combined because deposits can be developing in both areas, the air intake and in the fuel system. By cleaning both areas, the total carbon deposits are reduced and eliminating the possibility of reintroducing deposits from the air intake system. BG Fuel Injection & Combustion Chamber Cleaner is an especially effective gasoline direct injection system cleanup product.
High pressure, high heat, gasoline direct injection engines demand spotlessly clean combustion chambers and fuel injectors to function efficiently. Just a minimal amount of carbon deposit buildup in the fuel injection system can have a substantial effect on drivability. Most fuel injection system cleaners are not designed for rock hard combustion chamber deposits.
The BG VIA installs BG Fuel Injection & Combustion Chamber Cleaner through the fuel rail where it can perform the quickest, most thorough cleanup of fuel injectors and combustion chambers. Part of the BG GDI Fuel/Air Induction Service, it pre-soaks deposits allowing BG 44K to provide a more effective cleanup process.
Products Used For This Service: Air Intake System Cleaner, Fuel Injection System Cleaner. ISC, 44K.
Combustion chamber - Location at which the air/fuel mixture is burned
Catalytic converter - Reduces harmful emissions
Intake valve - Allows an air (GDI) or an air and fuel mixture (PFI) into the cylinders.
Air intake - Distributes air coming into the engine evenly to each of the cylinders
Spark plug - Supplies the spark that ignites the fuel/air mixture
Injector - Sprays fuel into the combustion chamber
EGR - Recirculates exhaust gas back into the intake
1. Pour BG 44(K) in the fuel tank
2. Fill the BG VIA ® with BG Fuel Injection System Cleaner
3. Connect the stainless steel hose to the inlet side of the fuel rail
4. Run the engine until the BG Fuel Injection System cleaner has been exhausted
5. Fill the BG VIA ® with BG Air Intake System cleaner & attach BG AIS Cleaning Tool
6. Clip BG AIS Cleaning Tool to air intake boot
7. When the supply tool is empty, remove equipment & test drive the vehicle
Dealers, tire shops, Auto repair shops, and complete car care services all recommend this service. The service is called BG Induction Service, BG fuel/air induction service, or BG air induction service, but its all the same thing. The service completely cleans the fuel system intakes, runners, injectors, etc. Since all cars are some form of direct injection, this service is a must at around the 30,000 miles. Unless you want to start replacing injectors! Remember, your car doesn't have just 1 injector!
This service cleans the air intake system of deposits
This service cleans the entire Fuel Injection System
Piston squish areas
The pintle
The BG Fuel/Air Induction Service should be repeated every 15,000 miles. There is no guarantee a system will fail, but if you use this service before the vehicle hits 100,000 miles, you’ll be enrolled in a Lifetime Protection Plan that is transferable at vehicle resale (no additional cost). Even if the car is over 100,000 miles, this service can help return the car to peak performance.
There are two plans: plan 1: 0-50,000 miles; plan 2: 50,001-100,000 miles. To maintain coverage, schedule your service every 15,000 miles. BG Fuel/Air Induction service - if a covered component fails, BG pays for repaur up to: plan 1: $4,000; plan 2: $2,000.
BG ISC® Induction System Cleaner™ quickly and safely cleans fuel injectors and removes hard, baked-on carbon deposits from intake valves, combustion chambers and EGR ports.
Finely tuned, high efficiency engines are extremely sensitive to deposits that build-up on intake valves, combustion chambers and EGR Systems. After a few thousand miles of driving, most engines have accumulated sufficient deposits in these areas to cause real drivability problems such as rough idle, hard starting, hesitation and loss of power.
Used by a professional technician, BG ISC® Induction System Cleaner™ is designed to be used exclusively with BG supply tools and adaptors. For complete clean-up, BG ISC® should be used in conjunction with BG 44K® added to the vehicle fuel tank at the time of service.
BG ISC® will not harm gaskets, seals, hoses or any component int he fuel system. Catalytic converter and oxygen sensor safe.
BG ISC® Induction System Cleaner is part of the BG EGR Service. Wichita Induction Service Cleaner>>
Wichita, KS
Muskogee, OK
Broken Arrow, OK
Tulsa, OK
Please click anywhere to continue browsing our site.